The Many Uses of the Carpenter Pencil
Share
Posted by John L. on December 4, 2019 in Contractor Focus

As a carpenter by trade, a carpenter pencil has been in my tool belt for as long as I can remember. Those funny looking rectangular pencils catch the attention of some who see them for the first time and wonder why they are designed the way they are. From my experience, here is what I can share about the design and use of carpenter pencils.

 

The shape of the carpenter pencil is unlike your typical round wood pencil—the dimensions are ¼ inch x ½ inch x 7 inches. It must be long enough and strong enough to withstand the construction environment and the pressure used when marking. The rectangular or elliptical cross-section allows easier grip than standard pencils and prevents the pencil from rolling on slanted surfaces such as roofs.

 

In addition, a carpenter pencil can be used as a gauge. For example, if you were building a deck, your deck boards could be spaced ¼ inch by using the carpenter pencil. Personally, I like to install wood deck boards tight together, which gives a nice gap over time when the wood shrinks, but when using PVC decking, I would gap the decking ¼ inch.

 

Using a well-sharpened carpenter pencil to mark lumber cannot be matched. The rectangular graphite lead draws better on wood, stays sharper longer, and is less prone to breakage. A carpenter pencil is sharpened by whittling the end with a utility knife. Some carpenters sharpen both ends at the beginning of the day. 

 

What you are looking to scribe will determine the method used to sharpen the carpenter pencil. With standard sharpening, you put an edge on the rectangular long end of the lead (like sharpening an ax). This will give you a 1/8th inch scribe. Offset sharpening would give you a 3/8th inch scribe. These tend to help when not using a scribe block. In project point sharpening, a belt sander would take the wood off one flat side of the pencil to scribe in tight places to the exact plane. With blunt sharpening, the full rectangular lead is exposed with the flat blunt end and no edge. This type of sharpening is used when marking on rough surfaces, such as concrete, stone, or brick, as it can make clear heavy marks with less wear on the lead.

 

You will also find carpenter pencils with round lead. Round lead tends to hold a point better than rectangular lead and some carpenters prefer using them when doing trim work. Personally, I prefer using standard round pencils when doing trim work. They seem to make more accurate marks when doing miters and sit much better behind my ear.

John L. is our Construction guru
I bring over 35 years of experience in the construction industry in both field and office positions to Acuity including carpentry, welding, project management, contract negotiation, and much more. Also, I founded my own commercial general contracting firm specializing in building grocery stores. Over the years I’ve worked closely with architects, civil engineers, and developers. I’ve found it instrumental to build solid relationships with all involved in the construction project, including insurance companies. This is why I am here, I want to help you the contractor better understand insurance and help Acuity to offer products and services that meet your unique needs. I feel a close connection to construction and with my background I feel that I can make sure contractors have a better insurance experience.


Get a quote today and Achieve Total Acuity
Posted By: John L. on November 20, 2019 in Contractor Focus
A large part of our journey through life is the profession we choose. I chose construction and, looking back after 37 years in the industry, I have no regrets. Drawing from my own experience, I have put together 8 advantages of choosing a career in the construction trades.
Posted By: John L. on November 5, 2019 in Contractor Focus
Closing out a construction project is one of the most important aspects of a job. Taking the entire construction process, winding it down, and gathering all the information and documents needed for closeout can have its challenges. This seems especially true for larger projects.
Posted By: John L. on October 30, 2019 in Contractor Focus
There are differences between commercial and residential construction, especially when it comes to building relationships with owners. If you are a home improvement contractor or a residential contractor who works for homeowners, you may be aware of the importance of nurturing that relationship.